8 oz Clear PET Plastic Bullet Round Bottle - 24-410 Neck Finish

This 24-410 twist open/close dispensing spout closure is commonly used for:

This 24-410 neck finish press top dispensing twist-to-lock closure is made of (P/P) polypropylene plastic and comes with a twist locking ability, Disc Top Go cap. It comes in a white finish smooth skirt with a black locking collar and a white flat press top.

Press top closures, also known as disc top closures, are commonly used to dispense a variety of products. This dispensing closure is a great choice for dispensing products with thicker viscosities. The Disc Top Go prevents leaks from accidental unlocking and eliminates additional costs to shrink wrap, tear-strips, or additional bags.

• Sold by Case
• 24-410 Neck Finish
• Press Top Twist Lock

This press top dispensing closure is commonly used for:

• Shampoos
• Conditioners
• Lotions
• Liquid Soaps
• Pet Care Products
• Household Cleaners
• A variety of other products

This 24-410 neck finish press top dispensing twist-to-lock closure is made of (P/P) polypropylene plastic and comes with a twist locking ability, Disc Top Go cap. It comes in a white finish smooth skirt with a black locking collar and a flat press top.

Press top closures, also known as disc top closures, are commonly used to dispense a variety of products. This dispensing closure is a great choice for dispensing products with thicker viscosities. The Disc Top Go prevents leaks from accidental unlocking and eliminates additional costs to shrink wrap, tear-strips, or additional bags.

• Sold Individually
• 24-410 Neck Finish
• Press Top Twist Lock

This press top dispensing closure is commonly used for:

• Shampoos
• Conditioners
• Lotions
• Liquid Soaps
• Pet Care Products
• Household Cleaners
• A variety of other products

This 24-410 white polypropylene (P/P) plastic continuous thread closure has a ribbed skirt and smooth stipple and includes an unprinted FSM-1 liner innerseal. Polypropylene is a highly impermeable and tough material that is lightweight and durable thermoplastic.

• Sold by Case
• 24-410 Neck Finish
• Unprinted FSM-1 liner

This 24-410 silver aluminum closure has a ribbed skirt and a smooth top which also includes a PE polyethylene foam liner inner seal. This closure is a great choice for both plastic and glass bottles. A PE foam liner is a great general purpose liner because the material is compressible and creates a stable seal. It has good chemical resistance for products such as acids, alkalis, and some solvents. Also great for water-based products and cosmetics.

Please Note: This closure should not be used to package hydrocarbon-based solvents. A PE foam liner does not provide the consumer with an indication of tampering (tamper evidence).

• Sold by Case
• 24-410 Neck Finish
• PE Foam Liner

This 24-410 silver aluminum closure is commonly used for:

• Syrups
• Sauces
• Beverages
• Cosmetic Products
• Household Chemicals

Pressure sensitive seals are a quick and easy way to safeguard your product from being tampered with while also preserving the freshness of your product by providing an airtight seal. These polystyrene foam liners, made from FDA approved materials, are coated with a torque-activated adhesive and require no special equipment to apply. Simply place them over the mouth of any bottle or jar, and screw on your closure tightly. These single-use seals are made to work with all container materials from glass to plastic, and easily peel off for consumer use.

• Sold by Case
• 24 mm Neck Finish
• 'Sealed For Your Protection' Design

Disclaimer:

• These seals are not recommended for extreme hot or cold uses (such as in applications that require products to be refrigerated or frozen).
• Please contact our customer service team for samples. We do not guarantee this item for any specific use and recommend testing samples prior to purchasing.
• We do not allow returns on pressure-sensitive seals. If you are uncertain of the size you need or the function of this item; please get in touch with our customer service team for guidance.

This 24-410 black lotion pump has a ribbed skirt, a lock down feature for use during supply chain distribution, a 2 cc dose per stroke (pump), and a 5.125 inch dip tube length. Perfect for materials such as lotion, liquid soaps and shampoos.

• Sold by Case
• 24-410 Neck Finish
• 5.125 inch LDPE Dip Tube
• Lock Down Ribbed Gasket
• 2 cc Output

Note: The dip tube length may vary as a general guide provided by the vendor. It is critical to know the exact size requirement as there is no universal measurement. To ensure the product is a fit, order a sample to test for product compatibility. The dip tubes can also be trimmed to size for a better fit.

• Sold Individually
• 24-410 Neck Finish
• Smooth Gasket
• Lock Up Pump

Note: The dip tube length may vary as a general guide provided by the vendor. It is critical to know the exact size requirement as there is no universal measurement. To ensure the product is a fit, order a sample to test for product compatibility. The dip tubes can also be trimmed to size for a better fit.

This 24-410 brushed aluminum lotion pump has a smooth skirt, a lock down feature for use during supply chain distribution, a 2 cc dose per stroke (pump), and a 5.125 inch dip tube length. Perfect for materials such as lotion, liquid soaps and shampoos.

• Sold Individually
• 24-410 Neck Finish
• Metal Shell
• Lock Down Pump

Note: The dip tube length may vary as a general guide provided by the vendor. It is critical to know the exact size requirement as there is no universal measurement. To ensure the product is a fit, order a sample to test for product compatibility. The dip tubes can also be trimmed to size for a better fit.

This 24-410 white lotion pump has a ribbed skirt, a lock up feature for use during supply chain distribution, a 1.2 cc dose per stroke (pump), and a 5.125 inch dip tube length.

Perfect for materials such as lotion, liquid soaps and shampoos.

Note: The dip tube length may vary as a general guide provided by the vendor. It is critical to know the exact size requirement as there is no universal measurement. To ensure the product is a fit, order a sample to test for product compatibility. The dip tubes can also be trimmed to size for a better fit.

• Sold Individually
• 24-410 Neck Finish
• Smooth Gasket
• Lock Up Pump

Note: The dip tube length may vary as a general guide provided by the vendor. It is critical to know the exact size requirement as there is no universal measurement. To ensure the product is a fit, order a sample to test for product compatibility. The dip tubes can also be trimmed to size for a better fit.